The classification of Gold Lace Trim types and the production process of each lace. Lace embroidery is a common fashion accessory element. It is usually a decorative hollow product made of cotton thread, hemp thread, silk thread or various fabrics, embroidered or woven. Lace is divided into four categories: machine weaving, knitting, embroidery and weaving. Lace interwoven with silk yarn is widely used among ethnic minorities in our country, so it is also called ethnic lace. Most of the patterns use auspicious patterns. The woven lace has a tight texture, a three-dimensional pattern and rich colors. Knitted lace has a loose weave and prominent eyelets for a light and elegant appearance. The number of embroidery lace colors is not limited, and complex patterns can be produced. Braided lace is made by lace machine or hand-woven.
There are many types of Eyelashes Lace Trim, generally there are stick lace, Qingzhou lace, carved flat embroidery, shuttle lace, Jimo lace, hand lace, EMI lace, embroidery lace, braided lace, and machine-woven lace. Qingzhoufu lace is divided into two types: full-length lace and mosaic lace. Mangong lace is made of refined cotton thread, and is woven into various fancy patterns by flat weaving, spaced weaving, sparse weaving, and dense weaving techniques, with an overall artistic effect of openwork. The mosaic lace is made of woven lace as the main body, and is embroidered with linen cloth. Products include plate cushions, small inserts, tablecloths, bedspreads, lace craft umbrellas, etc. Now the most widely used machine-made lace is machine-made lace, which can be divided into four categories: weaving, knitting, embroidery and weaving according to the process:
1. Woven lace:
It is formed by interweaving warp and weft under the control of jacquard mechanism. Commonly used raw materials are cotton thread, gold and silver thread, rayon thread, polyester thread and so on. The loom can weave multiple Gold Lace Trim at the same time, or weave them into single strips and then divide them into strips. Lace width is 3-170mm. Lace shading weaves include plain, twill, satin, honeycomb, small patterns, etc. The woven lace has a tight texture, a three-dimensional flower shape and rich colors.
2. Knitted lace:
In 1955, European and American countries began to produce knitted lace on multi-bar warp knitting machines. Most of the raw materials are nylon yarn, polyester yarn, etc., so it is also called knitted nylon lace. Knitted lace is loose, with obvious holes, and the shape is light and beautiful.
3. Embroidered lace:
It was first created in Switzerland and the Federal Republic of Germany. It controls the embroidery machine to move up, down, left, and right through the pattern board, and through the automatic exchange of the needle and the shuttle, the upper thread and the bottom thread are connected to form a pattern. At present, Eyelashes Lace Trim is divided into two types: machine embroidery lace and hand Eyelashes Lace Trim. The embroidery machine is an automatic shuttle type, and the pattern is controlled by the jacquard mechanism during weaving. After getting off the machine, it is processed and opened. The blank can be a variety of fabrics, mainly thin. The machine-embroidered lace is fine in workmanship, the flower shape is protruding, and the three-dimensional effect is strong. The hand-embroidered lace can be used to embroider complex patterns that cannot be produced by hand-embroidered machines, so it has a realistic image and is full of artistic sense.
4. Braided Lace:
Woven by torque lace machine. Cotton thread is the main raw material. During weaving, the cardboard controls the twisting and moving of the spool, so that the yarns are knitted together to form a pattern. The torque lace machine can weave multiple strips of Gold Lace Trim at the same time, and remove the connection between the laces after getting off the machine to form a single strip. The texture of woven lace is loose and airy, and the shape is smooth and beautiful.
Post time: Feb-13-2023