Nylon zipper manufacturers before installing nylon zippers, in the zipper part of the hot on some adhesive lining, especially in sewing light or unstable fabric, the use of about 1 inch wide, length and the length of the thin adhesive lining, the effect and appearance of the sewing zipper will be of great help.
Overlap type: garment garment car 5/8 inch seam, and seam with a false thread to set up the zipper opening, and then ironing the seam, the closed zipper is placed on the opposite side of the good seam, so that the edge of the cloth on the right side of the zipper is aligned with the edge of the seam. With seam of 1/4 inch seam zipper cloth and paper, must be careful, don't live pieces, then put the zipper flip to the front, as near to the fake stitching along the false suture or car and the other side of the zipper, then open the fabric, make heads are measured.2d pattern, from the bottom of the zipper front car 3/8 of an inch wide open wire to the top, then removed the false stitches.
Hidden form: it is a kind of easy and fast method to install nylon zipper, because there is no need for false line and front line, the use of invisible zipper foot, nylon zipper manufacturers can be as close to the zipper tooth as possible, so as to achieve the effect of invisible zipper "disappear" in the garment piece from the front.
Middle seam: the sewing position of the good clothes, ironing the sewing position, first the zipper edge of the cloth is stitched on the seam position of the piece, and then the front of the clothes is set to the appropriate position. To level off, the edge can't bulging with unilateral presser foot all from the bottom of the car to the top, use zipper presser foot, closer to the zipper teeth can make the car line, from line to 3/8 of an inch, pieces powder in the car before open wire can be used to draw positive picture of 3/8 of an inch thread, to dismantle the zipper mouth off after a good car open wire stitching, so that we can open the zipper.
Post time: Jun-01-2022