As a garment industry employee, especially a garment accessories buyer, it is necessary to have a good knowledge of garment accessories.Today let’s learn : how to distinguish the quality of buttons?What kind of buttons are good buttons?
Button quality we generally use this method to judge, color fastness to friction;Uniform shape;New QQ body of the stripper smooth, cavity smooth;Fine workmanship…Such a button is a good quality button.Of course, different materials do buttons (such as resin buttons and shell buttons, etc.), distinguish between the quality of buttons have different standards, for example: to hardware buttons, a lot of people will weigh, understand the “gold content”.
Is there a more scientific and specific way to identify the quality of buttons?Below small make up will button inspection methods and requirements and standards to share with you.
Button inspection methods and requirements and standards:
1. Compare samples or confirm samples.See if the color and model are consistent with the sample;
2. There should be no cracks, notches, uneven and obvious scratches on the button surface;
3. No turning crack or bubble on the back;No rotten edge, uneven thickness phenomenon;
4. The pattern should be free from obvious deformation, white eyes, white circles, etc.
5. Buttonholes should be smooth and unobvious;Needle holes are perforated and broken, symmetrical and without large eyes.If it is dark eye buckle, dark eye groove should be smooth, no obvious burst.
6. After electroplating or other process treatment, the effect should be uniform. If some special effects cannot be consistent, they can be packed separately.
7. The color difference of buttons for the same batch shall not be lower than GB250 level iv, and shall not be lower than GB250 level III compared with the incoming samples.
8, packaging inspection, after the appearance inspection/customer requirements of the performance test are all qualified, before the packaging.A certificate or other label should be included in the package.The quantity of packing shall be in accordance with the regulations, and the actual quantity of each bag shall be in accordance with the regulations. When the tolerance is found to be exceeded due to different thickness or other reasons, the full quantity shall be inspected.
9. Pressing buttons/awning buttons/five-claw buttons should be trialed before delivery to test the button performance and usability, and provide mold making and sample making to the customer.
Post time: Sep-30-2020