As the most important and common auxiliary material, zipper has always played a very important role in the field of auxiliary materials. Although it looks ordinary, it is essential. Clothing zipper is one of the application categories of zipper. What problems do we encounter when using Color Resin Zipper?
Resin zipper
1. What problems should be paid attention to when using Resin Plastic Zipper?
(1) When pulling the slider, the force should not be too large;
(2) When using the sleeve and socket, it is recommended to insert the sleeve into the bottom of the socket cavity, and then pull the slider;
(3) For the zipper on the package, when there are too many things, if the zipper is pulled, the zipper will be subjected to too much force and the teeth will be separated from the belt. You should bring the left and right teeth of the zipper closer together to allow easy passage of the zipper head, and then slowly close the zipper.
2. When opening and closing the zipper, sometimes the resin zipper head bites the belt or cloth, and the slider cannot be pulled. so what should I do now?
In this case, if you pull hard on the slider, it will bite deeper and deeper. Invert the slider on the one hand and unwind the cloth on the other. When fully bite, don't pull the slider hard, pull it back slowly.
3. How to deal with the clogging phenomenon of Transparent Resin Zipper?
If the zipper is clogged, the zipper should be pulled back a certain distance and then pulled forward. Do not pull hard, otherwise the zipper teeth will fall off at an angle.
4. When using the resin zipper, the opening and closing is not smooth, what should I do?
If you pull the slider too hard, the sprockets will engage. At this point, apply paraffin wax or lubricating spray to the surface and inside of the sprockets, and then move the slider a few times until the slip is loose.
5. What should I pay attention to when using resin zipper clothes?
When washing clothes, it is recommended to close the zipper. This is the best state of the zipper when washing. This not only prolongs the life of the zipper, but also reduces wear and tear on the inner walls of the washing machine.
6. What should I do if the Special Teeth Resin Zipper head of the resin zipper jams the fabric, so that the zipper plate is broken or the zipper cannot be closed?
Use one hand to separate the sticky cloth and pull it to the back. With the other hand, pull the zipper pull forward. Do not use too much force to prevent the zipper from breaking, then restore the zipper to its original condition. In addition, when sewing, ensure the space of the zipper tape so that the zipper puller can be used smoothly.
7. What problems should be paid attention to for resin zippers used in leather or wool products?
Copper alloy zippers are used for leather products or wool, and should be treated with anti-rust before combining with leather products or wool.
8. If you put dark zippers and light-colored clothes together, it is easy to cause the problem of color transfer printing, how to solve it?
When dark zipper and light-colored main material are sealed and stored in the same polyethylene bag, the zipper and main material should be separated by paper to avoid this situation.
The above is a brief introduction to the most common problems of Two Way Resin Zipper hope to help everyone!
Post time: Oct-27-2022